Manual Adjustment Of Column Oil Level And Temperature Indicator - SaMASZ KW 141 Operator's Manual

Fig. 63b. Hydraulic distributor E type II – description of distributor functions:
turntable, 2- arm extension, 3- 2nd extension arm, 4- main extension arm,
b) EP control – electrical-proportional
In order to adjust the hydraulic distributor with electric proportional control:
adjust the hydraulic cylinders by pressing the buttons (1), (2), (3) on the coils,
❑
to switch sections (4) and (5) – apply 12V to the coils in the top line of the housing (6), (7), (8) or
❑
(9) (depending on the direction of the arm movement), and then switch them in the same way as
before.
Fig. 64. Hydraulic distributor EP – description of distributor functions
CAMEL 900 EP, KWT 650 EP, KWT 651 EP: 1 - turntable, 2- arm extension,

6.7. Manual adjustment of column oil level and temperature indicator

In the case of column oil level and temperature indicator failure, manual adjustment of sensors
is possible. This allows for restarting of the machine and service drive.
Causes of damage to column oil level and temperature indicator:
mechanical damage,
❑
damage of temperature and oil level sensors,
❑
oil overheating,
❑
oil level dropped below the admissible level.
❑
56
KWT, CAMEL, KOLIBER, KW, LAMA
5 4
5- cutting part, 6- start distributor
1
3- 2nd extension arm, 4- main extension arm, 5- cutting part;
KWT 550 EP: 1- turntable, 3- 2nd extension arm,
4- main extension arm, 5- cutting part
REAR EXTENSION ARMS
3
2 1
6
8 9
4 5
2 3
OPERATOR'S MANUAL
7
6