Standard Equipment And Spare Parts; Flails Applied In Mowing Heads - SaMASZ KW 141 Operator's Manual

3.4. Standard equipment and spare parts

Machine are sold with the following standard equipment:
warranty card,
❑
operator's manual with spare part list and declaration of conformity,
❑
control panel,
❑
extra cutting knives – 2 pcs,
❑
PTO shaft,
❑
warning plate with combined lights and reflectors,
❑
warning triangle,
❑
plate C-10 Drive at the left of the sign,
❑
spray paint (150 ml).
❑
Tab. 5. Recommended PTO shaft for mounting the machine to a tractor
Extension arm
Power
type
HP
KWT
2' 2"-2' 11"
CAMEL 35
KOLIBER
Shaft end without clutch –
Connect from tractor's side
NOTE!
PTO shaft lubrication frequency must be respected. Points shown in Fig. 22 shall be
lubricated every 50 hours. PTO shaft shall also be lubricated prior to and after period of
longer idleness.
PTO shafts of other brands with equivalent technical parameters may be used on the SaMASZ
permission.

3.4.1. Flails applied in mowing heads

In order to ensure proper operation of mowing head, if excessively worn flails should be replaced.
Relevant reference for flail could be found in mower parts catalogue.
The table below shows knives that can be mounted in SaMASZ mowers.
22
KWT, CAMEL, KOLIBER, KW, LAMA
Length Moment
ft in/mm Nm
460 7G3N066CE007007MA
660-900
Fig. 22. PTO shaft lubrication. Mounting directions
REAR EXTENSION ARMS
Symbol Clutch
OPERATOR'S MANUAL
Manufacturer Remarks
Bondioli & Pavesi
Shaft end without clutch –
Connect from mower's side