SaMASZ KW 141 Operator's Manual page 47

OPERATOR'S MANUAL
For LAMA 121 / 141 heads it is possible to manually shift the head to the side in relation to
the arm. In order to perform this, first:
untighten 6 screws M14 (1) (Fig. 48),
❑
move the head as desired,
❑
tighten screws M14 (1).
❑
Rotary mountings (item 2, Fig. 20), hydraulic turntable (item 3, Fig. 19) can be rotated vertically.
In case of the first type, the rotation is performed manually, and the hydraulic turntable rotation is
powered by the tractor's
(item 2, Fig. 19) perform the following:
lift the head over an even ground and set it horizontally,
❑
remove safety cotter (1) (
❑
remove locking pin (2),
❑
rotate the head as desired,
❑
secure the head with the pin and the cotter.
❑
REAR EXTENSION ARMS KWT, CAMEL, KOLIBER, KW, LAMA
Fig. 48. Lateral shift in relation to arm
hydraulics.
),
Fig. 49
Fig. 49. Rotary mounting
1
In order to turn
2
head in rotary mounting
1
47