Akuvox Smart Intercom R29 Series Admin Manual page 87

R29X
Admin Guide
relay will be open with local relay. But if there are different, the web
relay is invalid.
Web Relay Extension: The webrelay can only receive the DTMF
signal from the corresponding extension number.
4.3.2. Wiegand
Login to the website and go to the path Intercom - Advanced -
Wiegand to configure.
Wiegand Type: Support Wiegand 26,34,58. The different number
means different bits.
Wiegand Mode: Input or output. Typically, when you select input,
we generally connect the wiegand input device, such as the
wiegand card reader. Or R29 series can be used as output, It is
generally used to connect the third-party Access Control, then R29
series change the card information as wiegand signal, then transfer
to the access control module.
76
Figure 4.3.2 Wiegand