Local Rtp; Connect Setting - Akuvox Smart Intercom R29 Series Admin Manual

R29X
Admin Guide
3.4.3.3.

Local RTP

Go to Network - Advanced to configure.
Local RTP: To display and configure local RTP settings.
Starting RTP Port: Determine the minimum port that RTP stream
can use.
Max RTP Port: Determine the maximum port that RTP stream can
use.
3.4.3.4.

Connect Setting

Go to Network - Advanced to configure.
Connect Type: Display the device connection type, there are
three modes, Discovery, SDMC, Cloud.
Discovery: Enable or disable the discovery mode.
Device Address: It will show which node the device is bound.
Device Extension: Use extension number to distinguish the
multiple devices in the same node.
Figure 3.4.3.3. Local RTP
Figure 3.4.3.4 Connect setting
17