Akuvox Smart Intercom R29 Series Admin Manual page 84

R29X
Admin Guide
4.2.10. User Agent
Login to the website and go to the path Account - Advanced -
User Agent to configure.
User Agent: One can customize users agent field in the SIP
message; if user agent is set to specific value, users can see the
information from PCAP. If user agent is not set by default, users can
see the company name, model number and firmware version from
PCAP.
4.2.11. HTTP API
HTTP API configurations for Akuvox intercom are defined via web
interface path: Intercom - HTTP API to disable/enable a service
and select the user authentication method.
HTTP API: To enable/disable the service. If disable, system always
return HTTP 403 Forbidden status when users sends the request.
Auth Mode: There are six auth modes: None, Normal, WhiteList,
Figure 4.2.10 User Agent
Figure 4.2.11 HTTP API
73