Advertisement
Quick Links
Before using the device, check the device model and ensure that the shipped box includes the following items:
�
S���
�
Crosshead screwdriver
�
M�x�� crosshead screw
�
ST�x�� crosshead screw
Microphone
�
Wall-mounting bracket (USA)
�
�-Pin cable
�
#�-�� Phillips machine screw
�
Diode
S���
�
Wall-mounting bracket (EU)
�
��-Pin cable
�
ST�x�� crosshead screw
S���
�
M�x� crosshead screw
�
Foam
�
Plastic wall anchors
Speaker
Touch Screen
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Akuvox AV-S563W
Summary of Contents for Akuvox AV-S563W
- Page 1 S��� Before using the device, check the device model and ensure that the shipped box includes the following items: � � � � Wall-mounting bracket (EU) Wall-mounting bracket (USA) S��� M�x� crosshead screw � � � � Foam ��-Pin cable Crosshead screwdriver �-Pin cable �...
- Page 2 S��� Before You Start Tools needed (not included in shipped box) Cat Ethernet Cable Crosshead Screwdriver Voltage and Current Specifications It is suggested that use PoE or ��VDC �A power adapter to power on device. AWG Sizes and Properties Table Please follow the properly wire data to install device: Power Supply 12VDC 1A...
- Page 3 5.Use wet cloth clean device surface softly, and then wipe the surface with dry cloth for cleaning the device. 6.If there is abnormal situation of the device, including uncommon sound and smell, please power off the device and contact Akuvox Technical Team immediately. Wiring Interface To protect the device from potential damage caused by over-voltage, it is recommended to wire a diode into the circuit.
- Page 4 S��� Inst Step 1: Bracket Installa�on With 86 junc�on box in the wall Arrow should be upward Fix the wall-mounting bracket(EU) on the �� junction box with two M�x�� crosshead screws, please ensure the bracket against to wall. With 118 junc�on box in the wall Arrow should be upward Fix the wall-mounting bracket(USA) on the ���...
- Page 5 S��� Without electrical junc�on box in the wall Cut out a square hole on the wall with the dimension ��*��*��mm (height*width*depth). As shown in the figure, use a �mm electric drill to make two holes in parallel, each with a depth of ��mm, and ensure they are spaced ��mm apart.
- Page 6 S��� Tilt the device ��°and align the slots on the back cover with the hooks on the bracket. Then press down the device and make it against the wall. Use Crosshead screwdriver to secure two M�x� crosshead screw into the bottom of the device. Check the device if is stable, and the installation is done.
- Page 7 S��� Device Removal Use Crosshead screwdriver to remove the two M�x� crosshead screws on the bottom of the device. Tilt the device ��° as shown in the figure and push up it to remove the device. Application Network Topology SIP Video Phone Network Video Recorder (third party) (third party)
- Page 8 �. Akuvox warranty does not cover intentional mechanical damage or destruction caused by improper installation. �. Do not attempt to modify, alternate, maintain, or repair device by yourself. Akuvox warranty does not apply to damages caused by anyone who is not representative of Akuvox or an Akuvox authorized service provider. Please contact Akuvox Technical Team if the device need to be repaired.
Need help?
Do you have a question about the AV-S563W and is the answer not in the manual?
Questions and answers