Page 1
S��� Quick Guide Unpacking Before using the device, check the device model and ensure that the shipped box includes the following items: � x � x � x � x � x � x S��� Wiring cover Sealing ring Rubber plug (large) Rubber plug (medium) Rubber plug (small) �...
S��� S539 Quick Guide Before You Start Tools needed (not included in shipped box) · Cat Ethernet Cable · Crosshead Screwdriver · Electric Drill Voltage and Current Specifications · It is suggested that use ��VDC �A or ��VDC �A power adapter to power on device.
Page 3
�. Use wet cloth clean device surface softly, and then wipe the surface with dry cloth for cleaning the device. �. If there is abnormal situation of the device, including uncommon sound and smell, please power off the device and contact Akuvox Technical Team immediately. Wiring Interface To protect the device from potential damage caused by over-voltage, it is recommended to wire a diode into the circuit.
S��� Quick Guide Installation Step�: Bracket/Box Installation �.Wall Mounting a.Stick wall-mounting template onto the wall according to your need. b.Please make sure all cables can go through the wiring holes on the template. Note: If there is a ��-embedded box installed in the wall, please align the two screw holes of box.
Page 5
S��� Quick Guide �. Flush Mounting �.� Normal Installation a.Dig out a square hole on the wall (height* width*depth= ���.�* ���* ��mm) . b.Lead cables through the hole, or reserve the PVC conduit. Note: The hole can be larger than recommended size based on the actual situation.
Page 6
S��� S539 Quick Guide Use six M�x� crosshead screws to fix the flush-mounting bracket on the box. �.� Simple Installation (with lower resistance of vandalism) a.Use cement or non-corrosive structural adhesive to fill the gap between the wall and flush-mounting box.
Page 7
S��� Quick Guide a.Connect the wires to the terminal blocks (for details, refer to "Device Wiring"). b.Insert the terminal blocks into the corresponding interface of the main board. Note: The pry tool can be used to unplug the terminal block. a.Press sealing ring and wiring cover into the corresponding groove b.Tighten the wiring cover by six M�x�...
Page 8
S��� Quick Guide Application Network Topology SIP Video Phone Indoor Monitor Network Video Recorder (third party) (third party) PoE+ PoE+ PoE+ PoE+ S��� S��� S��� S��� Face Enrollment Standards �.Quality standard Distorted facial photo is beautified, overexposed, too-dark, blurred, or disproportional image, and can not be identified because it makes facial features less identifiable.
�. Akuvox warranty does not cover intentional mechanical damage or destruction caused by improper installation. �. Do not attempt to modify, alternate, maintain, or repair device by yourself. Akuvox warranty does not apply to damages caused by anyone who is not representative of Akuvox or an Akuvox authorized service provider. Please contact Akuvox Technical Team if the device need to be repaired.
Need help?
Do you have a question about the S539 and is the answer not in the manual?
Questions and answers