R29X
Admin Guide
3.8.3.3.
Public Pin Codes in device
In the phone interface, go to Password - Public Key Passwd,
enter the old public key, R29 series support 3 default public keys.
Then enter the new password, after entering the new password
Confirm, click save icon.
Note: Just need to enable public key password in public key
password setting.
3.8.3.4.
Public Pin Codes in websites
Go to the path Intercom - Basic - Password. Users can configure
project key and public key with this function. Public key is the
password used by all occupants in a building.
Public Enable: The default status is on.
PublicKey Bits Limit: Setup the key digits.
Public Key: R29 series support 3 default public keys, users can
reset a new public key.
51
Figure 3.8.3.3 Public key
Figure 3.8.3.4 Password
Need help?
Do you have a question about the Smart Intercom R29 Series and is the answer not in the manual?