Page 1
S562 S562 Quick Guide Quick Guide Unpacking Before using the device, check the device model and ensure that the shipped box includes the following items: S��� X � Plastic wall anchor X � Wall-mounting bracket X � �-Pin cable X �...
Page 2
S562 Quick Guide Installa�on Step �: Bracket Installation With ��/��� junction box in the wall ��� junction box �� junction box Round junction box Arrow upwards Wall-mounting bracket M�x�� crosshead screws Fix the wall-mounting bracket on the ��/��� embedded box or round junction box with two M�x��...
Page 3
S562 Quick Guide Step�: Device Mounting Without junction box in the wall According to Device Wiring Part,plug thecables from the wall into corresponding interface on the back cover to test the device whether works properly. According to the position of wires, use a hand drill with �mm diameter bit to make two ��mm depth...
Page 4
S562 Quick Guide Device Removal Use Allen wrench to unscrew the two M�x� hex socket screws on the bottom of the device, Then ilt the device ��° as shown in the picture and push up it to remove the device.
Page 5
S562 Quick Guide Applica�on Network Topology SIP Video Phone (third party) Network Video Recorder (third party) S��� S��� Door Phone Door Phone Configura�on �.Access Basic Information: After setting up network and power, enter Setting > Status to check Account, Network, Version status.
Need help?
Do you have a question about the S562 and is the answer not in the manual?
Questions and answers