Installing A Filler Panel - Nortel 8600 Installation Manual

88 Module installation and connection
2
Installing a filler panel
If you plan to remove a module from the chassis without immediately
replacing it, you must install a filler panel in the slot. To maintain proper
airflow and cooling, always cover unused module slots and power supply
bays with filler panels.
Copyright © 2008 Nortel Networks
.
The first figure shows the 8003, 8006, and 8010 chassis; the
second figure shows the 8010co chassis.
Pull the filler panel away from the slot.
Do not operate a chassis without either a filler panel or a module
installed in a slot.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
--End--