Nortel 8600 Installation Manual page 37

The following figure shows the location of the 8616GTE module LEDs.
Figure 9
8616GTE module LEDs
The following table describes the 8616GTE module LEDs.
Table 4
8616GTE module LEDs
Type Label
Port Link
Activity
Module Online
The 8616GTE module supports up to 32 000 table entries in its forwarding
engine.
The 8616GTE module does not support R or M mode.
Copyright © 2008 Nortel Networks
.
Color, State Meaning
Green, Steady The port is linked and enabled.
Amber, Steady The port is connected but detects an error
condition.
Off The port is disabled or has no link.
Green, Blinking
The port is receiving data. As port utilization
increases, this LED can blink so fast that it
appears to be steady.
Green, Steady The module has completed the power-on
self-test and software initialization and is
operating normally.
Amber, Steady The module failed the power-on self-test.
Amber, Blinking The module is inserted into the chassis and it
is running diagnostics.
Off The module power is off. If the switch power
is on, the module is performing the power-on
self-test and software initialization. A module
in this state is not yet functional.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Interface module descriptions 37