Connecting And Managing Cables - Nortel 8600 Installation Manual

106 Module installation and connection

Connecting and managing cables

Use cable management brackets to keep groups of cable clusters fastened
and out of the way, but accessible for maintenance. To facilitate card
installation and removal, connect, label, and bundle the cables for each
module together.
Procedure steps
Step
1
2
Copyright © 2008 Nortel Networks
.
Action
Connect the appropriate cable to the module.
Route the cable up to the appropriate cable management bracket
and channel as shown in the following figures.
The first figure shows the 8010, 8006, 8003 chassis. The second
shows the 8010co chassis.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008