Port Connectors - Nortel 8600 Installation Manual

118 Technical specifications
Table 37
8608GTX module specifications (cont'd.)
Electrical specifications
MTBF rating
Connector type
Cable specifications
The following table provides power specifications.
Table 38
8608GTE power specifications
Specification
3.3 V power (W)
12 V power (W)
Total power (W)

Port connectors

The ports on the 8608GTE and 8608GTM modules are RJ-45 ports wired
as shown in the following table.
Table 39
Pin assignments: 8608GTE and 8608GTM module port
Connector
Copyright © 2008 Nortel Networks
.
Type:
Maximum distance:
Pin number
1
2
3
4
5
6
7
8
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
180 449 hr
RJ-45 (see "Port connectors" (page
118))
Category 5 or better UTP cable
for 1000 Mbps operation. Cables
must use all four pairs. Wiring
configuration and performance are
defined by EIA/TIA Standard 568
and IEEE Standard 802.3 2000
edition.
328 ft (100 m)
Value
73.3
64.8
138.1
Signal
Bidirectional Data A + (BI_DA+)
Bidirectional Data A – (BI_DA–)
Bidirectional Data B + (BI_DB+)
Bidirectional Data C + (BI_DC+)
Bidirectional Data C – (BI_DC–)
Bidirectional Data B – (BI_DB–)
Bidirectional Data D + (BI_DD+)
Bidirectional Data D – (BI_DD–)