Nortel 8600 Installation Manual page 32

32 Ethernet Routing Switch 8600 module fundamentals
Figure 2
8608GBE or 8608GBM module
For a list of Nortel-qualified GBICs, see
GBICs" (page
The following figure shows the location of the 8608GBE and 8608GBM
module LEDs.
Figure 3
8608GBE and 8608GBM module LEDs
The following table describes the 8608GBE and 8608GBM module LEDs.
Table 1
8608GBE and 8608GBM module LEDs
Type Label
Port TX
RX
Copyright © 2008 Nortel Networks
.
64).
Color, State
Green, Blinking
Amber, Steady
Off
Green, Steady
Green, Blinking
Amber, Steady
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
"Nortel-qualified SFPs, XFPs, and
Meaning
The port is transmitting data.
A fault condition exists on the line or on
the attached remote device.
The port has not detected a fault
condition.
The port is linked and enabled.
The port is receiving data.
The port has either no optical signal or
no link synchronization.