Nortel 8600 Installation Manual page 76

76 Ethernet Routing Switch 8600 module fundamentals
Table 27
8692 SF/CPU module LEDs (cont'd.)
Label
Power Supply 1, 2, 3
Fan 1, 2
Master
Online
8692 SF/CPU Ethernet management port
The Ethernet management port on the 8692 SF/CPU module is a Medium
Dependent Interface (MDI) 10/100BASE-T port that allows out-of-band
management of the switch using a Web browser or Device Manager. You
can also establish a Telnet or SSH (Secure Shell) session to access the
CLI. Use this port to connect the switch to a network management station.
The Ethernet management port has its own IP address, but does not
switch traffic to other ports in the chassis.
This port can be used only as a management port. This port provides
out-of-band management for the 8692 SF/CPU module.
Copyright © 2008 Nortel Networks
.
Color, State Meaning
Green, Steady The specified power supply is operating
normally.
Amber, Steady The specified power supply failed.
Off A power supply is not present in the specified
bay, or the power supply in the specified bay is
not turned on.
Green, Steady The specified fan is operating normally.
The specified fan is present in the chassis and
Amber, Steady
has failed, or no fan is present in the chassis
and should be present.
The specified fan is not present in the chassis
Off
(and should not be present).
Green, Steady The CPU subsystem on the module is
performing diagnostics.
Green, Blinking This module is providing active CPU functions
for the switch and is the Master CPU module.
Amber, Steady The CPU subsystem is in a fault state.
Off The CPU subsystem on the module is up and
in Standby mode.
Green, Steady The switch fabric portion of the module is online
and is load-sharing.
Amber, Steady The switch fabric portion of the module failed
diagnostics.
Off The switch fabric portion of the module is offline.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008