Nortel 8600 Installation Manual page 107

3
4
5
6
7
Copyright © 2008 Nortel Networks
.
Route the cable to the termination panel, loosely fastening it with
velcro straps or sheet fiber along the path.
Fasten the connector to the termination panel end of the cable.
If you use cables manufactured by Nortel, the connectors are
already fastened to predetermined lengths of cable.
Label the unconnected end of the cable with the node identifier
(from site records) and the shelf, cage, slot, and port number.
When all the transmitting cables from the same module are
connected to the termination panel, use velcro straps or sheet
fiber wrapped around the cables to manage them.
Use scissors to cut a section of the sheet fiber wide enough to
wrap around the cables.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Connecting and managing cables 107