Installing The Enterprise Enhanced Cpu Daughter Card - Nortel 8600 Installation Manual

100 Module installation and connection
2
3

Installing the Enterprise enhanced CPU daughter card

Install the Enterprise enhanced CPU daughter card (SuperMezz) to offload
processing from the CPU to the daughter card, and to enable use of all
Ethernet Routing Switch 8600 features.
Installing a SuperMezz takes appriximately 10 minutes.
ATTENTION
If you have a system with two Ethernet Routing Switch 8692SF/CPU modules,
you must install the daughter card on each of the modules.
Prerequisites
•
Copyright © 2008 Nortel Networks
.
Adjust the read-write protect switch.
Reinsert the memory card.
The 8692 SF/CPU is removed from the Ethernet Routing Switch 8600
using proper removal procedures.
CAUTION
Electrostatic discharge can damage hardware. See
avoiding ESD" (page
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
CAUTION
Risk of data loss
You must remove the card from the SF/CPU module
before changing the read-write protection. Failure
to remove the card can result in improper write
protection.
--End--
87).
"Job aid: