Job Aid: Required Cables - Nortel 8600 Installation Manual

108 Module installation and connection
8
9
10

Job aid: required cables

Ports on the 8632TXE, 8632TXM, 8648TXE, and 8648TXM modules are
wired as MDI-X. Use straight-through cables to connect these ports to MDI
connections, such as workstations or servers. Use crossover cables to
connect these ports to other MDI-X connections, such as hubs or other
switches.
The following table lists the cable requirements for the Ethernet Routing
Switch 8600 modules. For GBIC, SFP, and XFP cable types and cable
lengths, see Nortel Ethernet Routing Switch 8600 Installation — SFP, XFP,
OADM, and GBIC Hardware Components, NN46205-320.
Copyright © 2008 Nortel Networks
.
Round the corners of the sheet fiber section.
Loosely wrap the sheet fiber and secure it using lacing cord or
tie wraps.
Secure the velcro straps or sheet fiber to brackets with lacing
cord or tie wraps.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
--End--