Steps
1. Align the notch on the memory module with the tab on the memory module slot.
2. Slide the memory module firmly into the slot at an angle.
3. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Solid-state drive
Removing the M.2 2280 SATA SSD
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The figure indicates the location of the SATA M.2 2280 SSD and provides a visual representation of the removal procedure.
24
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.