Steps
1. Locate the coin-cell battery slot on your computer.
2. Adhere the coin-cell battery on to the slot.
3. Connect the coin-cell cable to the connector on the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
SmartCard reader
Removing the smartcard reader board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
2280 SATA
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
inner
frame.
About this task
The figure indicates the location of the smart card reader board and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
SSD.
computer.
Disassembly and reassembly
41