Steps
1. Locate the speakers on your computer.
2. Disconnect and Unroute the speaker cables from the retention clips on the computer.
3. Lift the speakers out of the computer.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Locate the speakers slot on your computer.
2. Align and place the speakers in the slot on your computer.
3. Route the speaker cables through the retention clips on your computer.
Disassembly and reassembly
47