Installing Display Hinge - Dell Latitude 5411 Service Manual

Installing display hinge

About this task
The figure indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
1. Place the display hinge on the display assembly.
2. Replace the four (M2.5x3) screws to secure the display hinge to the display assembly.
Next steps
1. Install the display panel.
2. Install the display hinge
3. Install the display bezel.
4. Install the display assembly.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in
caps.
After working inside your computer.
Disassembly and reassembly 65