Solid-State Drive; Removing The M.2 2280 Solid-State Drive - Dell Inspiron 14 5410 2-in-1 Service Manual

Table 2. Antenna-cable color scheme (continued)
Connector on the
wireless card
Auxiliary
2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the
wireless-card slot.
3. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and palm-rest and keyboard
assembly.
4. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and system board.
5. Adhere the tape that secures the antenna cable to the wireless-card bracket.
Next steps
1. Install the base cover.
2. Follow the procedure in
3. Exit Service Mode.

Solid-state drive

Removing the M.2 2280 solid-state drive

Prerequisites
1. Follow the procedure in
2. Enter Service Mode.
3. Remove the base cover.
About this task
The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal
procedure.
26 Removing and installing components
Antenna-cable color
Black
After working inside your
Before working inside your
Silkscreen marking
AUX
computer.
computer.
▲ (black triangle)