Figure 27. Installing the left fan
Steps
1. Align and place the left fan onto the palm-rest assembly.
2. Replace the two (M1.6x3) screws to secure the left fan to the palm-rest assembly.
3. Connect the left-fan cable to the connector (FANL) on the system board.
4. Adhere the mylar sticker on the system board.
Next steps
1. Install the
base
cover.
2. Install the
Nano-SIM card
3. Follow the procedure in
Solid state drive
Removing the solid state drive
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information, see step 6 in
computer.
2. Remove the
Nano-SIM card
3. Remove the
base
cover.
About this task
The following images indicate the location of the solid state drive and provide a visual representation of the removal procedure.
tray.
after working inside your
before working inside your
tray.
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
before working inside your
49