Camera
Removing camera
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display hinge
7. Remove the
display
panel.
About this task
The figure indicates the location of the camera and provides a visual representation of the removal procedure.
Steps
1. Peel the two conductive tape that secures the camera in place.
2. Disconnect the camera cable from the connector on the camera module .
3. Carefully pry and lift the camera module from the display back cover.
Installing camera
About this task
The figure indicates the location of the camera and provides a visual representation of the installation procedure.
82
Disassembly and reassembly
Before working inside your
caps.
computer.