Steps
1. Locate the SSD slot on your computer.
2. Slide the SSD into the slot.
3. Place the SSD thermal tape over the SSD module.
4. Replace the single (M2x3) screw to secure the SSD module to the computer.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Inner frame
Removing the inner frame
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
2280 SATA
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
About this task
The figure indicates the location of the inner frame and provides a visual representation of the removal procedure.
26
Disassembly and reassembly
After working inside your
computer.
Before working inside your
SSD.
computer.