Steps
1. Locate the DC-in slot on your computer.
2. Insert the DC-in port into the slot on your computer.
3. Connect the DC-in cable to the connector on the system board.
4. Place the DC-in metal bracket on the DC-in port.
5. Replace the two screws (M2x5) that secure the DC-in metal bracket to the system board.
Next steps
1. Install the heatsink-discrete.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
39