2. Install the DC-in.
3. Install the
LED
board.
4. Install the
inner
frame.
5. Install the memory.
6. Install the
WLAN
card.
7. Install the
WWAN
card.
8. Install the
2280 SATA
SSD.
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure in
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
2280 SATA
5. Remove the memory.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
9. Remove the
LED
board.
10. Remove the DC-in.
11. Remove the
system
board.
NOTE:
System board can be removed with heatsink attached.
About this task
The figure indicates the location of the power button with fingerprint reader and provides a visual representation of the removal
procedure.
Steps
1. Locate the power button with fingerprint reader on your computer.
2. Remove the two (M2x2) screws that secure the power button to the palmrest.
60
Disassembly and reassembly
After working inside your
computer.
Before working inside your
SSD.
computer.