Installing The Display Bezel - Dell Latitude 5411 Service Manual

Installing the display bezel

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the display bezel and provides a visual representation of the installation procedure.
Steps
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next steps
1. Install the display assembly.
2. Install the WLAN card.
3. Install the WWAN card.
4. Install the battery.
5. Install the base cover.
6. Follow the procedure in
74 Disassembly and reassembly
After working inside your computer.