3.
To remove the hard drive pull loop from the hard drive assembly:
a. Remove the screws that secure the hard drive pull loop to the hard drive assembly [1].
b. Pull the hard drive pull loop and separate it from the hard drive assembly [2].
Installing the hard drive
1.
Attach the hard drive pull loop to the hard drive assembly.
2.
Install the screws that secure the hard drive pull loop to the hard drive assembly.
3.
Slide the hard drive into the hard drive bay.
4.
Close the hard drive bay press latch door.
5.
Follow the procedure in
Solid State Drive (SSD)
Removing the SSD
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
base cover
After working inside your
Before working inside your
computer.
computer.
23