Steps
1. Locate the WLAN card slot on your computer.
2. Slide the WLAN card into the slot on the system board.
3. Connect the WLAN antenna cables to the WLAN module.
4. Place the WLAN card bracket on the WLAN card and replace the single (M2x3) screw to secure the bracket to the computer.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
20
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.