Steps
1. Locate the LED board slot on your computer.
2. Align and place the LED board on the slot on your computer.
3. Replace the single (M2x3) screw that secures the LED board to the computer.
4. Adhere the LED board cable to the adhesive strip on the palmrest.
5. Connect the LED board cable to the connector on the system board.
Next steps
1. Install the
inner frame
2. Install the
WLAN
card.
3. Install the
WWAN
card.
4. Install the
2280 SATA
SSD.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
50
Disassembly and reassembly
After working inside your
computer.