Flashforge Inventor II User Manual page 6

③
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts.
④
Do not operate the device while you are tired or under the influence of drugs,
alcohol or medication.
· Cautions
①
Do not leave the device unattended for long.
②
Do not make any modifications to the device.
③
To lower the build plate before loading/unloading filament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
④
Operate the device in a well
⑤
Never use the device for illegal activities.
⑥
Never use the device to make any food storage vessels.
⑦
Never use the device to make any electrical appliance.
⑧
Never put the model into y
⑨
Do not remove the models with force.
· Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
· Filament Requirements
Do not abuse the filament. Please make sure you use the Flashforge filament or the
filament from the brands accepted by Flashforge.
· Filament Storage
All polymers degrade with time. Do not unpack until filament is needed. Filament
Inventor Ⅱ User Guide | www.flashforge.com
-ventilated environment.
our mouth.
6
0086-0579-82273989