Flashforge Inventor II User Manual page 11

2.1.2 Terms
Build Plate
Build Tape
Build Volume
Leveling Knobs
Extruder
Nozzle
Extruder Fan
Filament Intake
Filament Guide Tube
Filament Cartridge
PVP Glue Stick
Unclog Tool
Stamping Wrench
Inventor Ⅱ User Guide | www.flashforge.com
The glass surface on which the InventorⅡ builds an
object.
The blue tape that covers InventorⅡ's build plate so
that the object can adhere to the build plate well.
The three dimensional amount of space that an object
will use once it is completed. The largest build volume
of InventorⅡ is 140*140*140mm.
Knobs under the build platform that are used for
adjusting the distance between the nozzle and build
plate.
The device that draws the filament from the spool,
melts it and pushes it through a nozzle into the build
plate.
Also called "print head", which located at the bottom
of the extruder where heated filament is squeezed out.
To cool the outer assembly of the extruder and gear
motor
An opening located at the top of the extruder .
A black plastic piece that guides the filament from the
filament box to the filament intake
A specific box for placing Flashforge filament
A solid adhesive used for making the model stick to the
build plate firmly
A tool that used for cleaning the extruder
A tool that used for seizing the nozzle's metal cube
11
0086-0579-82273989