Flashforge Inventor II User Manual page 55

Supports: If you print a model with supports, you should click the inverted triangle
and select [Enable].
Raft: You are suggested to select [Enable].
Resolution: You are suggested to select [Standard]
More Options: You are suggested to keep them default.
Click [OK] to select the path to save the Gcode file. You can rename the file as you
like and save it as a .g or .gx file, click
Note: .gx files are available for preview while the .g files are not. They are displaying
as follows:
g. Files
Next, we are going to print the model.
Inventor Ⅱ User Guide | www.flashforge.com
[Save] to generate a Gcode file.
6-6
gx. Files
6-7
0086-0579-82273989
55