Loading Filament - Flashforge Inventor II User Manual

(3-3)Insert the power supply into the power input on the back of the InventorⅡ and
plug the power cord into an electrical outlet.
3-4
(3-4) Press the starter button to start the device.

3.3 Loading Filament

For stable filament loading and proper device protection, you need to install the
filament guide tube properly.
(3-5) Take out the filament guide tube, thread the filament from the filament
cartridge through the tube.
3-5
(3-6) Insert the filament from the filament guide tube into the filament intake.
Inventor Ⅱ User Guide | www.flashforge.com
0086-0579-82273989
20
3-6