③
Material type:
Choose according to the type of model
④
Supports:
When print suspended structure models, support is necessary. Click
[supports]
to create support part for the printing.
⑤
Raft:
This function will help the model to stick well on the platform.
⑥
Wall:
During dual color printing, this function will help to clear the leaking
filament of another extruder.
⑦
Vase Mode:
No capping for the model
:You have three resolution solution(with default setting)to choose from,
⑧
Resolution
high resolution is corresponding with slow printing speed, opposite for the low
resolution. For PLA printing, an extra solution "Hyper" is available.
⑨
More options:
Click
[More options]
temperature. Different resolution solution is corresponding to different defaults, click
[Restore Defaults]
to back to default setting.
●Layer
a. Layer: Layer thickness of the printing model. With a small value, the surface
of the model will be more smooth.
b. First Layer Height: This is the first layer of the model, which will affect the
sticking performance between the model and platform. Maximize is 0.4mm, usually
the default is ok.
c. Shell: Contains the outside shell value, capping layer value (under vase pattern,
top solid layer setting is invalid.)
● Primeter Shells: Maximize is 10
a. Top Solid Layer: Maximize is 10, minimum is 1.
b. Bottom Solid Layer: Maximize is 10, minimum is 1.
● Infill
Inventor Ⅱ User Guide | www.flashforge.com
to set for layer, shell, infill, speed and
0086-0579-82273989
40