Otto Bock 4R57-WR Instructions For Use Manual page 25

► Have a damaged or missing protective cap replaced by the O&P pro­
fessional.
► Do not perform the replacement independently.
NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents and/or
disinfectants.
► Only clean the product with a damp cloth and mild soap (e.g.
453H10=1 Ottobock DermaClean).
► Disinfect the product with 634A58 isopropyl alcohol when needed.
► Do not use disinfectants based on hydrogen peroxide and silver salt to
disinfect the product.
► Only use fresh water with a temperature of no more than 65°C for
cleaning.
► If dirt cannot be removed, the product has to be sent to an authorised
Ottobock Service Centre. The O&P professional is your contact per­
son.
5 Scope of Delivery and Accessories
5.1 Scope of delivery
• 1 pc. 4R57=WR rotation adapter or
1 pc. 4R57=WR-ST rotation adapter
• 1 pc. 647G1303 instructions for use (qualified personnel)
5.2 Accessories
The following components are not included in the scope of delivery and must
be ordered separately:
• 4X46=ST lamination dummy (for 4R57*=ST)
5.3 Spare parts
• 4Y492 protective cap
6 Preparation for use
6.1 Required tools
• 710D4 torque wrench (up to 30 Nm)
• 636K13 adhesive (Loctite 241)
25