Controller Over-Current Cut Settings; Power Assist Sensor Settings; Speed Sensor Settings - Key-Disp KD58C User Manual

◆Controller Over-current Cut Settings

Current Set represents controller over-current cut settings. The current value can be
changed from 7.0A to 25.0A.
To change basic settings, press the "+" or the "-" button to increase or decrease the
value of the current.
To store a changed setting, hold the "ON/OFF" button and then return to previous
menu.

◆Power assist Sensor Settings

Assistant num represents PAS sensitivity settings. The sensitivity value is "5" to
"24".
To store a changed setting, press the "ON/OFF" button and then return to previous
menu.
To change PAS sensitivity settings, press the "+" or the "-" button to choose the
desired sensitivity value.
PAS Ratio Interface
Current Settings Interface
The PAS Sensitivity Settings
8