Table of Contents
Advertisement
2. PAS Ratio Settings
To change the value of PAS ratio, press the "+" button or "-" button to choose the
desired value, and then press the "i" button to confirm
For example, the ratio range is "45-55 percent" for level "1", ratio value can be
changed and the default value is 50 percent.
To store a modified setting, press the "i" button and move to next PAS level ratio
settings.
After all PAS ratios are input, hold the "i" button for 2s to confirm and then return to
previous menu.
For PAS ratio default values, please refer to Attached list 2.
◆Controller Over-current Cut Settings
'Set Current' represents controller over-current cut settings. The current value can be
changed from 7.0A to 25.0A.
To change basic settings, press the "+" or the "-" button to increase or decrease the
value of the current.
To store a changed setting, hold the "i" button and then return to previous menu.
PAS Ratio Settings Interface
11
Advertisement
Table of Contents
