Assist Level Ratio Settings; Controller Over-Current Cut Settings(Optional) - Key-Disp KD21C User Manual

Assist Level Ratio Settings

The speed of each level can be adjusted to meet different riders' needs by setting the ratios.
For example, the default ratio is 50% for level "1"; the ratio range is 45%-55% for Level "1".
To change the ratio of a certain assist level, press the UP/DOWN button to choose the desired
ratio value, and then press the "ON/OFF" button to confirm and then move to the next level ratio
setting.
After ratios of all levels were input, hold the "ON/OFF" button for 2s to confirm and return to
previous menu.
*Please refer to assist level ratio default values Attached list 3
◆Controller Over-Current Cut Settings
CUR represents controller over-current cut settings. CUR value ranges from 7.0A to 22.0A. The
default value is 15A.
Press the UP/DOWN button to increase or decrease the value of the current.
Press the ON/OFF button and then return to previous menu.
Assist Level Ratio Interface
Current Settings Interface
11