3. Measurement Modes
A probe has the following measurement modes:
Measurement mode
xyLv mode
TduvLv mode
u'v'Lv mode
Flicker mode
XYZ mode
λdPeLv mode
* Under the initial settings, the mode is set to xyLv mode at the start-up.
Description of mode
Mode for displaying and outputting chromaticity coordinates x, y and luminance Lv
Mode for displaying and outputting correlated color temperature T, color difference from
blackbody locus duv, and luminance Lv
Mode for displaying and outputting u'v' chromaticity diagram coordinates (CIE1976 UCS
chromaticity diagram) and luminance Lv
Displays the flicker amount in the contrast method (AC/DC). The unit is "%".
Displays the flicker amount in the JEITA method. The unit is "dB".
Mode for displaying and outputting tristimulus values XYZ
Mode for displaying and outputting dominant wavelength λd, excitation purity Pe, and
luminance Lv
27