Selecting the Color Mode
The following color modes are available.
* Factory setting: Lvxy
Color Mode
Lv x y
Lv u' v'
Lv Tcp duv
X Y Z
Dominant
wavelength*
1
Excitation purity
Flicker
(Contrast)
Flicker (JEITA)
*1 When the measured value is a non-spectral color, the value of the complementary wavelength is displayed. In this case,
the symbol is also λd but a minus sign is added.
Operating Procedure
1
On the measurement screen, press the [MODE] key to display a desired color mode.
Each time the [MODE] key is pressed, the measurement screen display is cycled in the order of Lv x y -> Lv u'v' ->
Lv Tcp duv -> X Y Z -> Lv λd Pe -> FMA -> JEITA -> Lv x y.
The color mode setting will be kept even if the POWER switch is set to OFF ().
LCD screen display
Description of mode
Mode for displaying and outputting luminance Lv and
chromaticity coordinates x, y
Luminance Lv and u'v' chromaticity diagram (CIE 1976
UCS chromaticity diagram)
Mode for displaying and outputting coordinates u' and v'
Mode for displaying and outputting luminance Lv,
correlated color temperature Tcp, and color difference
from blackbody locus duv
Mode for displaying and outputting tristimulus values X, Y, Z
Mode for displaying and outputting luminance Lv,
dominant wavelength λd, and excitation purity Pe
Mode for displaying and outputting Contrast-method
flicker
Mode for displaying and outputting JEITA-method flicker
108