Konica Minolta CA-410 Instruction Manual page 97

6
-1 When selecting [All CH] and pressing the
[ENTER] key, a delete confirmation
message is displayed. Press the [RIGHT]
or [LEFT] key to select [Yes] or [No], and
then press the [ENTER] key to confirm
the action.
6
-2 When selecting [Select CH], the screen
for selecting a calibration channel is
displayed. Press the [UP] or [DOWN] key
to select the channel with data to delete.
7
When you press the [ENTER] key, a
delete confirmation message is
displayed. Press the [RIGHT] or [LEFT]
key to select [Yes] or [No] and press the
[ENTER] key to confirm the action.
8
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.
MENU
User Calib > Delete
Delete User Calibration CH
Delete all user calibration CH?
All CH
Select CH
MENU
User Calib > Delete
All CH
Select CH
MENU
User Calib > Delete > Select CH
01
CH00
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
MENU
User Calib > Delete > Select CH
ID Delete User Calibration CH
01
CH00
Delete selected CH?
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
95
Yes No
Yes No