6. Menu screen
Press the [MENU] key to change probe or data processor settings.
The menu screen includes areas 1 to 3, and options for the item selected in area 1 are displayed in area 2, and options or
settings for the item selected in area 2 are displayed in area 3.
• Select an item in area 2 after selecting an item in area 1 using the [UP]/[DOWN] keys and pressing the [RIGHT] or
[ENTER] key.
• After selecting an item in area 2 using the [UP]/[DOWN] keys and pressing the [RIGHT] or [ENTER] key, the settings are
displayed or an item in area 3 can be selected. Pressing the [LEFT] or [ESC] key returns to item selection in area 1.
• After selecting an item in area 3 using the [UP] or [DOWN] key and pressing the [RIGHT] or [ENTER] key, the setting
screen for the item is displayed. Pressing the [LEFT] or [ESC] key returns to item selection in area 2.
* For items to set, refer to the Settings section.
M e a s C o n d
U s e r C a l i b
T a r g e t
O p t i o n
S y s t e m
Menu area 1
Trigger mode 0-cal AUTO
S y n c M o d e
M e a s S p e e d
T r i g g e r M o d e
I n t e r v a l M e a s
I n t e r v a l A l e r t
J E I TA f r e q r e s o l u t i o n
Menu area 2
NTSC
AUTO
OFF
OFF
OFF
0.07 Hz
Menu area 3
53