Konica Minolta CA-410 Instruction Manual page 78

Setting the Interval Alert
6
Press the [UP] or [DOWN] key and the
[RIGHT]/[LEFT] keys to set a threshold,
move to [Complete], and then press the
[ENTER] key.
* The threshold can be set to between 0.1 to
100.0%.
If the entered value is out of the available range,
an alert screen is displayed. Press the [ENTER] key
to return to the previous screen and reset the
value.
Press the [ESC] key to cancel configuration of the
setting and restore the original value.
7
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.
The interval alert setting and value will be kept even
if the POWER switch is set to OFF ().
MENU
M e a s C o n d
U s e r C a l i b Interval Alert threshold
T a r g e t
Set the threshold value for the rate of
O p t i o n
change
S y s t e m
Input Error
The input data is incorrect
Input correct value
76
Trigger mode 0-cal AUTO
S y n c M o d e
◉ ON [ 50 %]
M e a s S p e e d
○ OFF
T r i g g e r M o d e
I n t e r v a l M e a s
I n t e r v a l A l e r t
J E I TA f r e q r e s o l u t i o n
０５０．０ ％
Complete
OK