Introduction - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

INTRODUCTION

Thank you for purchasing the Mitsubishi Electric MELSEC iQ-F series programmable controllers.
This manual describes the settings for the inverter communication function of the FX5 CPU module.
Before using this product, please read this manual and relevant manuals carefully and develop familiarity with the
specifications to handle the product correctly.
Regarding use of this product
• This product has been manufactured as a general-purpose part for general industries, and has not been
designed or manufactured to be incorporated in a device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or
passenger movement vehicles, please contact Mitsubishi Electric sales office.
• This product has been manufactured under strict quality control. However when installing the product where
major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions into
the system.
Note
• If in doubt at any stage during the installation of the product, always consult a professional electrical engineer
who is qualified and trained to the local and national standards. If in doubt about the operation or use, please
contact your local Mitsubishi Electric representative.
• Mitsubishi Electric will not accept responsibility for actual use of the product based on these illustrative
examples. Please use it after confirming the function and safety of the equipment and system.
• The content, specification etc. of this manual may be changed, for improvement, without notice.
• The information in this manual has been carefully checked and is believed to be accurate; however, if you notice
a doubtful point, an error, etc., please contact your local Mitsubishi Electric representative. When doing so,
please provide the manual number given at the end of this manual.
2