3. PROGRAMMABLE CONTROLLER SETTINGS
Parameter Settings
1
Connect the personal computer to the programmable controller, and write the necessary parameters to the
programmable controller.
2
3.1 Parameter Settings Using GX Works3 (Required Settings)
3
1
Start GX Works3.
4
2
Select [Project]
5
6
18
Communication
Communication
Test Programs
Settings
*: Parameters can be set regardless of the inverter connection status.
[New].
Writing Data to the
Programmable Controller
Ethernet cable
3
On the displayed window, set the following, and
click the
button.
OK
4
In the "Navigation" window, select
[Parameter]
[485 Serial Port].
[FX5UCPU]
[Module Parameter]