Inverter Reset - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

2. INVERTER SETTINGS
Names of the Parts on
Parameter List
the Operation Panel

2.4 Inverter Reset

To reset the inverter, turn OFF the power, and then ON again after the LEDs on the operation panel turn OFF.
The inverter will restart about 1 second after reset.
*: Note that the internal thermal integrated value of the electronic thermal relay function and the number of retries
are cleared (erased) by resetting the inverter.
• Make sure to turn OFF the start signal before resetting an inverter fault. Resetting the inverter
Point fault with the start signal ON restarts the motor suddenly.
• The inverter reset can be executed in the program.
Parameter Settings Inverter Reset
Turn OFF the power, and then
ON again after the LEDs on the
operation panel turn OFF.
ON
OFF
P.20
1
2
3
4
5
6
17